Favourable shipping conditions
More than 2500 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00
PMT flat rates EVO 2.0 for flat roof east / west 10°
Hint!

PMT flat rates EVO 2.0 for flat roof east / west 10°

Prices are only visible for commercial customers once they register.

Available from stock

If it has to be quick - the PMT EVO 2.0 flat rates for flat roof east / west First flat roof... more

If it has to be quick - the PMT EVO 2.0 flat rates for flat roof east / west

First flat roof mounting system with general building authority approval 

 

The price is per module and includes all components required for assembly. Please send us the data entry form after your order so that we can determine the exact quantities for structural engineering approval.

 

EVO 2.0 - the system with the CLICK !

 

The Upper Franconian manufacturer PMT enters the next round with the EVO 2.0 mounting system. The first generation of the innovative EVOlution flat roof substructure had already proved the easy and quick installation many times. The base profiles are connected using a fast and safe click system without tools. Only when inserting the transverse connectors and mounting the module clamps, which vary from 30-50 mm, is a single bit insert required on the cordless screwdriver. This allows you to complete the installation in record time. Thanks to wide hollow-chamber profiles with high-tech protective mat, the system rests securely on the ground together with the calculated ballast. The compatibility of the protective mats with all types of roof coverings is also certified. Modified module supports create improved aerodynamics and thus, further lowering ballast. 

 

Advantages of PMT EVO 2.0 :

 

  • Further improved aerodynamics - lower ballast required
  • Simple and quick system assembly
  • Minimal use of tools required
  • Built-in fall arrester possible

 

Product features:

 

  • General building inspectorate approval for the entire system
  • Module lengths from 1570 to 2050 mm
  • Module width from 960 to 1050 mm
  • Module inclination 10°
  • Certified high-tech protective mat, no plasticiser migration


All-inclusive price is per module for systems with a building height of up to 8 m, max. snow/wind load zone 2 and foil/bitumen covering. Optional accessories such as cable clips and ballast clamps are charged separately. The number of modules per row must be at least equal to the number of rows. Projects with deviating roof data are only calculated individually. When using modules which are not held by Memodo in its portfolio, additional delivery costs may be incurred by PMT. 

Note: in order to prevent a possible inherent movement (caterpillar effect) of the system, we recommend taking precautions on site. 

 

 

PMT is one of the few manufacturers with general building inspectorate approval for the entire system. In addition, you will receive an individual structural engineering certificate from us for each planning. This is the highest quality, speed and safety for you and your customer. 

 

In addition to work gloves, a cordless screwdriver with Allen bit and slip clutch are required.... more

In addition to work gloves, a cordless screwdriver with Allen bit and slip clutch are required. A rubber mallet can also be used to fit the click components together. Please pay attention to sharp edges, as with all work with metal parts. Despite chip and burr-free rails, this cannot be completely ruled out.

Viewed