PMT EVO 2.0 Rückwand 10°, 2100 mm

PMT EVO 2.0 rear panel 10°, 2100 mm, 52215-1658

Manufacturer: PMT
Order number: 3822
Do you have any questions concerning this product?

Prices are only visible for commercial customers once they register.

Available from stock

Aerodynamics in PMT EVO 2.0 The PMT EVO 2.0 is a classic flat roof system with a slight... more

Close menu

Aerodynamics in PMT EVO 2.0

The PMT EVO 2.0 is a classic flat roof system with a slight ballast. Efficient wind guide concepts are necessary to get by here with as little ballast as possible. This was implemented with a central wind tunnel in the new EVO 2.0. This allowed the necessary ballast to be noticeably reduced. An important component here is the rear panel of EVO 2.0 south.

Product features:

Length: 2100 mm
Material: aluminium

PMT is one of the few manufacturers with general building inspectorate approval for the entire system. In addition, you will receive an individual structural engineering certificate from us for each planning. This is the highest quality, speed and safety for you and your customer.

In addition to work gloves, a cordless screwdriver with Allen bit and slip clutch are required.... more

Zurück

In addition to work gloves, a cordless screwdriver with Allen bit and slip clutch are required. A rubber mallet can also be used to fit the click components together. Please pay attention to sharp edges, as with all work with metal parts. Despite chip and burr-free rails, this cannot be completely ruled out.