The PMT EVO 2.0 is a classic flat roof system with a slight ballast. Efficient wind guide concepts are necessary to get by here with as little ballast as possible. This was implemented with a central wind tunnel in the new EVO 2.0. This allowed the necessary ballast to be noticeably reduced. An important component here is the rear panel of EVO 2.0 south.
Length: 1800 mm
Module inclination: 10°
PMT is one of the few manufacturers with general building inspectorate approval for the entire system. In addition, you will receive an individual structural engineering certificate from us for each planning. This is the highest quality, speed and safety for you and your customer.
In addition to work gloves, a cordless screwdriver with Allen bit and slip clutch are required. A rubber mallet can also be used to fit the click components together. Please pay attention to sharp edges, as with all work with metal parts. Despite chip and burr-free rails, this cannot be completely ruled out.